
Hope Silicon Lube 30ml
$34.95
Silicon Lube
Part Number: HTTLUBE
Barcode: 5013811779602
Product Code: HOP T BS HTTLUBE
Discipline: Road/MTB
Release Year:

Hope Rx4+ Caliper Flatmount+20Mm Dot Fluid
$269.95
Drop bar hydraulic calipers to suit either DOT or Mineral oil hydraulic drop bar set ups.
Slimline 4 piston lightweight design.
Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub.
Available in 6 different colours.
Both Post mount and Flat mount options to choose from (Note: does not fit IS mounts).
Weight: 123g for a Post Mount DOT complete caliper.
Part Number: HBSPC74S, HBSPC74S, HBSPC72S, HBSPC74R, HBSPC72R, HBSPC74PU, HBSPC72PU, HBSPC74C, HBSPC72C, HBSPC74B, HBSPC74N, HBSPC72N, HBSPC72B
Barcode: 5056454902204, 5056454902037, 5056454902051, 5056454902174, 5056454902150, 5056454902044, 5056454902167, 5056454902068, 5056454902181, 5056454902075, 5056454902198, 5056454902082, 5056454902204
Product Code: HOP RX4P FM20 D
Discipline: Road
Type: Hydraulic Disc Brake
Brake: Front Brake
Release Year: 2021

Hope R22 eBike Chainring Bosch
$179.95
Discover the Hope Technology expands its chainring range with the introduction of the R22, tailored explicitly to seamlessly integrate with the latest drivetrain systems. This new addition showcases a redesigned tooth profile meticulously crafted to harmonize with various prominent drivetrain configurations.
Moreover, the R22 incorporates updated spider designs, ensuring compatibility across an extensive range of drivetrain models. It supports an array of speeds, accommodating 9, 10, 11, and 12-speed systems, encompassing compatibility with both SRAM T-Type and Shimano HG+ configurations.
Features:
- Asymmetric tooth profile engineered for cross compatibility and functionality with different drivetrain systems.
- 9/10/11 and 12 Speed compatible (including SRAM T-Type and Shimano HG+).
- Improved mud shedding capability.
- Improved chain retention.
- Better performance with extreme chain angles on modern 1 x drivetrains.
- Tooth profile allows for more chain wear before function is compromised, extending service life.
- Spiderless rings have a new leg design with improved strength and stiffness.
- Machined from 7075-T6 aluminium.
- 28T to 36T size range.
- Available in Black, Silver, Blue, Red, Orange and Purple.
Part number: RR34EBOSP22, RR36EBOSP22
Barcode: 5056454964219, 5056454964226, 5056454964233, 5056454964240, 5056454964257, 5056454964264, 5056454964394, 5056454964400, 5056454964417, 5056454964424, 5056454964431, 5056454964448
Product code: HOP CR R22 EBOS'- 104mm BCD 4 Bolt.
- Hope Direct Mount STD Offset (49mm chainline).
- Hope Direct Mount BOOST Offset (52mm or 55mm chainline with WIDE axle crank).
- Bosch Gen 4 Direct Mount (52mm chainline).
- Shimano EP8/E8000 Direct Mount (52mm chainline).
- Brose/Specialized Direct Mount (52mm chainline).
Discipline: E-Bike
Release Year: 2023

Hope Bottom Bracket BSA 30MM
from $249.95
Our 30mm threaded bottom bracket boasts the same top-notch design and durability as our trusted 24mm model.
Part Number: BBSS30C, BBSS30PU, BBSS30B, BBSS30S, BBSS30R, BBSS30N, BBSS30A
Barcode: 5055168092164, 5055168084275, 5055168084367, 5055168084398, 5055168084381, 5055168053264, 5056454971248
Product Code: HOP BB BBSS30'- External bottom bracket designed for threaded bottom brackets
- The machined aluminium cups hold stainless steel cartridge bearings in stainless races
- High quality stainless steel bearings give a much greater life span than stock units
- Cartridge bearings are replaceable
- The unit is suitable for 68, 73, 83, 100 and 120mm width bottom brackets
- Designed to suit cranks with 30mm axles
- Please note specific fitting tool (HTT188) needed to fit bottom bracket
- Available separatelyRelease Year: 2007

Hope 1.5 To 1 1/8 Reducer Crown Race
$29.95
1.5 TO 1 1/8 REDUCER CROWN RACE
Part Number: HS136S
Barcode: 5055168089539
Product Code: HOP HP CR
Discipline: Road
Release Year: 2017

RaceFace Pedal Turbine Red
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Pedal Turbine Purple
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Pedal Turbine Orange
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Pedal Turbine Blue
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Pedal Turbine Kash Money
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Pedal Turbine Black
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Pedal Turbine Silver
$295.00
The Race Face Turbine Flat Pedals are engineered for riders seeking maximum grip and a secure, locked-in feel across all mountain biking disciplines, including trail, enduro, and downhill. With their innovative dual-axis concave design, these pedals offer exceptional foot stability and control on challenging terrain.
🔧 Key Features:
Dual-Axis Concavity: Features a 3mm deep concave platform both front-to-back and inboard-to-outboard, creating a “pocket” that cradles your foot for enhanced grip and comfort.
Adjustable Traction Pins: Equipped with 11 height-adjustable steel pins per side, each standing 6mm tall, allowing for customizable grip levels.
Durable Construction: Built with a CNC-machined 6061 aluminum body and a chromoly steel axle, ensuring strength and longevity.
Slim Profile: The platform measures 115mm in length and 110mm in width, with a maximum thickness of 20mm, providing a low-profile design that reduces pedal strikes.
Rebuildable Internals: Features a bushing on the inboard side and a bearing on the outboard side, both of which are fully serviceable and rebuildable for extended pedal life.
No Bearing Bulge: Designed without a bearing bulge next to the crank threads, offering improved ergonomics and a more comfortable stance.
Weight: Approximately 419 grams per pair.
Color Options: Available in seven vibrant colors: Black, Silver, Kashmoney, Purple, Orange, Red, and Blue.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes coverage for crashes.

RaceFace Wheel ERA30 12x148 MS 6B 29 Rear
$1,539.00
The Race Face Era Carbon Wheel is engineered for trail and enduro riders seeking a balanced blend of strength, compliance, and weight efficiency. Designed with front and rear-specific profiles, these wheels aim to provide optimal performance across varied terrains.
Performance Highlights;
Balanced Ride Feel: The Era wheels aim to combine the compliance of aluminium wheels with the snappy responsiveness of carbon, providing a comfortable yet precise ride .
Durability: The rear wheel’s deeper profile enhances impact resistance, making it suitable for aggressive enduro riding .
Lightweight: Despite their robust construction, the wheels maintain a competitive weight, aiding in climbing efficiency and manoeuvrability.
Key Features;
Front & Rear Specific Rims: The front rim is shallower (18.6mm) to enhance comfort and lateral compliance, while the rear rim is deeper (22.6mm) to withstand impacts and provide stiffness where needed .
30mm Internal Width: Supports modern tire profiles, ensuring optimal traction and ride feel .
Race Face Vault Hubs: Equipped with 6-pawl engagement and 3° engagement angle for quick power transfer.
Tubeless Ready: Pre-taped rims with valves included for easy tubeless setup .
Lifetime Warranty: Covers crashes and manufacturing defects, providing peace of mind for aggressive riders.

RaceFace Wheel ERA30 15x110 6B 29 Front
$1,359.00
The Race Face Era Carbon Wheel is engineered for trail and enduro riders seeking a balanced blend of strength, compliance, and weight efficiency. Designed with front and rear-specific profiles, these wheels aim to provide optimal performance across varied terrains.
Performance Highlights;
Balanced Ride Feel: The Era wheels aim to combine the compliance of aluminium wheels with the snappy responsiveness of carbon, providing a comfortable yet precise ride .
Durability: The rear wheel’s deeper profile enhances impact resistance, making it suitable for aggressive enduro riding .
Lightweight: Despite their robust construction, the wheels maintain a competitive weight, aiding in climbing efficiency and manoeuvrability.
Key Features;
Front & Rear Specific Rims: The front rim is shallower (18.6mm) to enhance comfort and lateral compliance, while the rear rim is deeper (22.6mm) to withstand impacts and provide stiffness where needed .
30mm Internal Width: Supports modern tire profiles, ensuring optimal traction and ride feel .
Race Face Vault Hubs: Equipped with 6-pawl engagement and 3° engagement angle for quick power transfer.
Tubeless Ready: Pre-taped rims with valves included for easy tubeless setup .
Lifetime Warranty: Covers crashes and manufacturing defects, providing peace of mind for aggressive riders.

RaceFace Wheel ERA30 12x148 XD 6B 29 Rear
$1,359.00
The Race Face Era Carbon Wheel is engineered for trail and enduro riders seeking a balanced blend of strength, compliance, and weight efficiency. Designed with front and rear-specific profiles, these wheels aim to provide optimal performance across varied terrains.
Performance Highlights;
Balanced Ride Feel: The Era wheels aim to combine the compliance of aluminium wheels with the snappy responsiveness of carbon, providing a comfortable yet precise ride .
Durability: The rear wheel’s deeper profile enhances impact resistance, making it suitable for aggressive enduro riding .
Lightweight: Despite their robust construction, the wheels maintain a competitive weight, aiding in climbing efficiency and manoeuvrability.
Key Features;
Front & Rear Specific Rims: The front rim is shallower (18.6mm) to enhance comfort and lateral compliance, while the rear rim is deeper (22.6mm) to withstand impacts and provide stiffness where needed .
30mm Internal Width: Supports modern tire profiles, ensuring optimal traction and ride feel .
Race Face Vault Hubs: Equipped with 6-pawl engagement and 3° engagement angle for quick power transfer.
Tubeless Ready: Pre-taped rims with valves included for easy tubeless setup .
Lifetime Warranty: Covers crashes and manufacturing defects, providing peace of mind for aggressive riders.

RaceFace H/Bar ERA 35x800 40mm-Stealth
$249.00
The Race Face Era Carbon Handlebar is engineered to enhance rider comfort and performance, particularly for enduro, trail, and eMTB disciplines. Developed over five years with extensive testing, the Era handlebar aims to reduce arm pump and hand fatigue through optimized compliance and strength.
Design Innovations;
GL Tune Compliance: Race Face’s “Goldilocks” (GL) tune achieves an optimal balance between vertical compliance and lateral stiffness, reducing rider fatigue without compromising control
Width-Specific Layups: Each handlebar width and rise combination features a specific carbon layup to maintain consistent compliance and ride feel, eliminating the need for trimming that can alter stiffness
Optimized Taper and Rise: A narrowed stem clamp area allows for a quicker taper and earlier rise, contributing to the bar’s compliant characteristics
Key Features & Specifications;
Material: 96-piece unidirectional (UD) carbon fiber layup, bound with toughened epoxy resin for high strength-to-weight ratio
Clamp Diameter: 35mm
Widths: 760mm, 780mm, 800mm
Rise Options: 10mm, 20mm, 40mm, 55mm (note: 55mm rise not available in 760mm width)
Backsweep / Upsweep: 8° / 5°
Weight: Approximately 220g for the 800mm width with 40mm rise
Stem Clamp Compatibility: Maximum clamp width of 60mm; not compatible with wider stems like direct mount stems
eMTB Ready: Rated for Category 4 use, suitable for enduro and eMTB applications
Colors: Six options including Stealth, Grey, Blue, Red, Orange, and Kash Money
Warranty: Lifetime warranty, including crash replacement

RaceFace H/Bar ERA 35x780 40mm-Stealth
$249.00
The Race Face Era Carbon Handlebar is engineered to enhance rider comfort and performance, particularly for enduro, trail, and eMTB disciplines. Developed over five years with extensive testing, the Era handlebar aims to reduce arm pump and hand fatigue through optimized compliance and strength.
Design Innovations;
GL Tune Compliance: Race Face’s “Goldilocks” (GL) tune achieves an optimal balance between vertical compliance and lateral stiffness, reducing rider fatigue without compromising control
Width-Specific Layups: Each handlebar width and rise combination features a specific carbon layup to maintain consistent compliance and ride feel, eliminating the need for trimming that can alter stiffness
Optimized Taper and Rise: A narrowed stem clamp area allows for a quicker taper and earlier rise, contributing to the bar’s compliant characteristics
Key Features & Specifications;
Material: 96-piece unidirectional (UD) carbon fiber layup, bound with toughened epoxy resin for high strength-to-weight ratio
Clamp Diameter: 35mm
Widths: 760mm, 780mm, 800mm
Rise Options: 10mm, 20mm, 40mm, 55mm (note: 55mm rise not available in 760mm width)
Backsweep / Upsweep: 8° / 5°
Weight: Approximately 220g for the 800mm width with 40mm rise
Stem Clamp Compatibility: Maximum clamp width of 60mm; not compatible with wider stems like direct mount stems
eMTB Ready: Rated for Category 4 use, suitable for enduro and eMTB applications
Colors: Six options including Stealth, Grey, Blue, Red, Orange, and Kash Money
Warranty: Lifetime warranty, including crash replacement

RaceFace H/Bar ERA 35x800 20mm-Stealth
$149.00
The Race Face Era Carbon Handlebar is engineered to enhance rider comfort and performance, particularly for enduro, trail, and eMTB disciplines. Developed over five years with extensive testing, the Era handlebar aims to reduce arm pump and hand fatigue through optimized compliance and strength.
Design Innovations;
GL Tune Compliance: Race Face’s “Goldilocks” (GL) tune achieves an optimal balance between vertical compliance and lateral stiffness, reducing rider fatigue without compromising control
Width-Specific Layups: Each handlebar width and rise combination features a specific carbon layup to maintain consistent compliance and ride feel, eliminating the need for trimming that can alter stiffness
Optimized Taper and Rise: A narrowed stem clamp area allows for a quicker taper and earlier rise, contributing to the bar’s compliant characteristics
Key Features & Specifications;
Material: 96-piece unidirectional (UD) carbon fiber layup, bound with toughened epoxy resin for high strength-to-weight ratio
Clamp Diameter: 35mm
Widths: 760mm, 780mm, 800mm
Rise Options: 10mm, 20mm, 40mm, 55mm (note: 55mm rise not available in 760mm width)
Backsweep / Upsweep: 8° / 5°
Weight: Approximately 220g for the 800mm width with 40mm rise
Stem Clamp Compatibility: Maximum clamp width of 60mm; not compatible with wider stems like direct mount stems
eMTB Ready: Rated for Category 4 use, suitable for enduro and eMTB applications
Colors: Six options including Stealth, Grey, Blue, Red, Orange, and Kash Money
Warranty: Lifetime warranty, including crash replacement

RaceFace H/Bar Turbine 35x800 40mm-Stealth
$149.00
The Race Face Turbine handlebar is a premium alloy mountain bike handlebar engineered for trail, all-mountain, and enduro riders seeking a balance of strength, compliance, and customization. Crafted from 7075-series aluminium, it offers a lightweight yet durable solution for aggressive riding.
Key Features;
Material: Cold-drawn 7075-T6 aluminum for high strength-to-weight ratio.
Clamp Diameter: Available in both 31.8mm and 35mm options to suit various stem compatibilities.
Widths: Offered in 720mm (flat bar), 725mm (3/4” rise), 760mm, 780mm, and 800mm, with onboard cut marks for easy customization.
Rise Options:
Flat (0mm)
3/4” (approximately 19mm)
10mm, 20mm, and 40mm
Sweep:
Backsweep: 8°
Upsweep: 5°
Weight: Approximately 276g for the 760mm x 20mm configuration.
Compliance: Engineered with Race Face’s “Goldilocks Tune” (GL Tune) for optimal vertical compliance and lateral stiffness, reducing arm pump and hand fatigue.
Color Options: Available in multiple anodized finishes, including Black, Blue, Red, Orange, Stealth, Purple, and Kashmoney Gold.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes crash replacement

RaceFace H/Bar Turbine 35x800 20mm-Black
$149.00
The Race Face Turbine handlebar is a premium alloy mountain bike handlebar engineered for trail, all-mountain, and enduro riders seeking a balance of strength, compliance, and customization. Crafted from 7075-series aluminium, it offers a lightweight yet durable solution for aggressive riding.
Key Features;
Material: Cold-drawn 7075-T6 aluminum for high strength-to-weight ratio.
Clamp Diameter: Available in both 31.8mm and 35mm options to suit various stem compatibilities.
Widths: Offered in 720mm (flat bar), 725mm (3/4” rise), 760mm, 780mm, and 800mm, with onboard cut marks for easy customization.
Rise Options:
Flat (0mm)
3/4” (approximately 19mm)
10mm, 20mm, and 40mm
Sweep:
Backsweep: 8°
Upsweep: 5°
Weight: Approximately 276g for the 760mm x 20mm configuration.
Compliance: Engineered with Race Face’s “Goldilocks Tune” (GL Tune) for optimal vertical compliance and lateral stiffness, reducing arm pump and hand fatigue.
Color Options: Available in multiple anodized finishes, including Black, Blue, Red, Orange, Stealth, Purple, and Kashmoney Gold.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes crash replacement

RaceFace H/Bar Turbine 35x780 40mm-Stealth
$149.00
The Race Face Turbine handlebar is a premium alloy mountain bike handlebar engineered for trail, all-mountain, and enduro riders seeking a balance of strength, compliance, and customization. Crafted from 7075-series aluminium, it offers a lightweight yet durable solution for aggressive riding.
Key Features;
Material: Cold-drawn 7075-T6 aluminum for high strength-to-weight ratio.
Clamp Diameter: Available in both 31.8mm and 35mm options to suit various stem compatibilities.
Widths: Offered in 720mm (flat bar), 725mm (3/4” rise), 760mm, 780mm, and 800mm, with onboard cut marks for easy customization.
Rise Options:
Flat (0mm)
3/4” (approximately 19mm)
10mm, 20mm, and 40mm
Sweep:
Backsweep: 8°
Upsweep: 5°
Weight: Approximately 276g for the 760mm x 20mm configuration.
Compliance: Engineered with Race Face’s “Goldilocks Tune” (GL Tune) for optimal vertical compliance and lateral stiffness, reducing arm pump and hand fatigue.
Color Options: Available in multiple anodized finishes, including Black, Blue, Red, Orange, Stealth, Purple, and Kashmoney Gold.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes crash replacement

RaceFace H/Bar Turbine 35x780 20mm-Stealth
$149.00
The Race Face Turbine handlebar is a premium alloy mountain bike handlebar engineered for trail, all-mountain, and enduro riders seeking a balance of strength, compliance, and customization. Crafted from 7075-series aluminium, it offers a lightweight yet durable solution for aggressive riding.
Key Features;
Material: Cold-drawn 7075-T6 aluminum for high strength-to-weight ratio.
Clamp Diameter: Available in both 31.8mm and 35mm options to suit various stem compatibilities.
Widths: Offered in 720mm (flat bar), 725mm (3/4” rise), 760mm, 780mm, and 800mm, with onboard cut marks for easy customization.
Rise Options:
Flat (0mm)
3/4” (approximately 19mm)
10mm, 20mm, and 40mm
Sweep:
Backsweep: 8°
Upsweep: 5°
Weight: Approximately 276g for the 760mm x 20mm configuration.
Compliance: Engineered with Race Face’s “Goldilocks Tune” (GL Tune) for optimal vertical compliance and lateral stiffness, reducing arm pump and hand fatigue.
Color Options: Available in multiple anodized finishes, including Black, Blue, Red, Orange, Stealth, Purple, and Kashmoney Gold.
Warranty: Backed by Race Face’s Lifetime Warranty, which includes crash replacement

Hope RS4 Centre Lock Rear Hub Quick Release 135mm
from $429.95
The perfect combination of lightweight and durability in a hub
Reduced drag ratchet mechanism
44 point engagement (8 deg)
Stainless Steel Bearings
Axle width available in 130mm or 135mm ** NOTE 135mm option only available in 28, 32 and 36 spoke hole drilling**
Aluminium Freehub
Shimano, Campagnolo and XDR compatible
9/10/11/12 speed
2 pawl ratchet
Colour Black, Silver, Red, Blue, Purple and Orange
Weight 262g for a 32 hole Shimano alloy freehub option
Part Number: RHRS428B0SA, RHRS428R0SA, RHRS428C0SA, RHRS432B0SA, RHRS432C0SA, RHRS436S5ZC
Barcode: 5056033439220, 5056033439213, 5056033438919, 5056033438933, 5056033439169, 5056033439176, 5056033439152, 5056033439114, 5056033439107, 5056033438988, 5056033438995, 5056033439091, 5056033439039, 5056033439053, 5056033439404, 5056033438971, 5056033439411, 5056033439299, 5056033439398, 5056033439350, 5056033439343, 5056033439275, 5056033439282, 5056033439336, 5056033439046, 5056033439237, 5056033438926, 5056033438803, 5056033438858, 5056033438766, 5056033438865, 5056033438872, 5056033438810, 5056033438681, 5056033438704, 5056033438698, 5056033438742, 5056033438445, 5056033438407, 5056033438636, 5056033438568, 5056033438384, 5056033438674, 5056033438391, 5056033438506, 5056033438582, 5056033438575, 5056033438346, 5056033438629, 5056033438490, 5056033438377, 5056033438452, 5056033438551
Product Code: Aluminium Freehub. Shimano and campagnolo compatible. 9/10/11 speed. 2 pawl ratchet. Available in 20, 24, 28, 32 and 36H. Colour Black, Silver, Red, Blue, Purple and Orange.
Discipline: Road
Axle Type: '135
Release Year: 2017

Hope Pro 3 Mono Rear Hub
$289.95
Pro 3 Mono Rear Hub
Part Number:
Barcode: 5055168031248, 5055168031217, 5055168031156, 5055168031491, 5055168031385, 5055168031194, 5055168031187, 5055168018300, 5055168031552, 5055168031361, 5055168031224, 5055168053035, 5055168031279, 5055168031309, 5055168031255, 5055168031316, 5055168018249, 5055168031484, 5055168031514, 5055168031477, 5055168031293, 5055168031538, 5055168031200, 5055168031170, 5055168031231, 5055168018270, 5055168031446, 5055168031415, 5055168031262
Product Code: HOP H3RQ5
Discipline: Mountain
Axle Type: Quick Release
Release Year: 2013

Hope Bottom Bracket Ceramic 83mm
$259.95
Hope BOTTOM BRACKET CERAMIC 83mm
Part Number: BBCRDHM, BBCRDHB, BBCRDHS, BBCRDHN, BBCRDHR, BBCRRSR, BBCRRSN
Barcode: 5055168021218, 5055168021195, 5055168021249, 5055168021225, 5055168021232, 5055168021294, 5055168021287
Product Code: HOP BB CB
Discipline: Mountain
Release Year: 2010

BBB Cycling CableWrap
$11.99
Rubber cable covers to protect the frame paint. For 4 mm derailleur cables. 2 pieces per set.
BCB-90D
Part Number: 2909059031, 2909059021
Barcode: 8716683090970, 8716683090956
Product Code: BCB-90BRelease Year: 2020

Hope Headsets -Top Cap - Pick n Mix
from $99.95
Headsets can be a minefield. Don't panic! With our pick'n'mix range you can choose the top and bottom cups separately , covering you for almost every headset combination out there.
Part Number: HSC7PU, HSC7C, HSC7S, HSC2S, HSC7N, HSC7B, HSC1C, HSC7R, HSC4, HSC2R, HSC8N, HSC1, HSC2, HSC3, HSC2PU, HSC5, HSC2B, HSC1R, HSC6, HSC2C, HSC9N, HSC9B, HSC9C, HSC9S, HSC9R, HSC9PU
Barcode: 5056033432689, 5056033432672, 5056033432702, 5055168097251, 5056033432573, 5056033432665, 5055168097176, 5056033432696, 5055168034171, 5055168097244, 5056033454148, 5055168034140, 5055168034157, 5055168034164, 5055168097237, 5055168034188, 5055168097213, 5055168097190, 5055168038063, 5055168097220, 5056454913262, 5056454913248, 5056454913255, 5056454913293, 5056454913286, 5056454913279
Product Code: HOP HP PMTTop and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. Head Doctor top cap sold seperately. Headset cups use custom made, replaceable stainless steel bearings to resist corrosion. The cups are all machined from 2014 T6 aluminium. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal. Available in black, silver, red, blue, purple and orange.
Steerer Diameter: 1 1/8"
Release Year: 2007

Hope Pro 5 Front Hub 110x20
from $224.95
Key Features
- New hub body profile for increased stiffness without adding weight
- Fully serviceable and rebuildable with simple tools
- Available with all modern freehub bodies
- End spacers can be easily swapped to suit different frame and axle standards
- Sealed Stainless Steel cartridge bearings throughout
- Hub shell machined from forged 2014 T6 aluminium billet
Part Number: FHP532B20B, FHP532N20B, FHP532C20B, FHP532PU20B, FHP532R20B, FHP532S20B
Barcode: 5056454920109, 5056454920260, 5056454920185, 5056454920345, 5056454920420, 5056454920505
Product Code: HOP H5F112Specs
- 32 Hole
- 6 Bolt Disc Fitment
- 110 x 20 Boost
Discipline: Mountain
Axle Type: '110/20
Release Year: 2023

Hope Disc Floating Rotors - Road 160mm 6 Bolt Attachment
$154.95
We've revamped our floating discs, widening their braking surfaces. Now, they're versatile enough to seamlessly integrate into various braking setups beyond just our own.
Part Number: HBSP3611606FS, HBSP3611606FC, HBSP3611606FN, HBSP3611606FR, HBSP3611606FB, HBSP3611606FPU, HBSP3611606FA
Barcode: 5056033436939, 5056033436908, 5056033436946, 5056033436922, 5056033436915, 5056033436953, 5056454972108
Product Code: HOP RR ROAD'- Popular amongst both performance orientated riders and those just looking for something a little different
- New design with wider braking surface to make them more compatible with other companies brakes
- Custom steel braking surface riveted to an aluminium central carrier
- Available in: 140, 160, 180, 183, 200, 203 and 205mm
- Floating design deals with changes in temperature
- Available in our six colour options. Weight 180mm: 146gRelease Year: 2017

Hope Oval Spiderless Retainer Ring
$129.95
Direct mount Oval spiderless retainer ring to fit our chainset
Part Number: RR30BHCSPOVN, RR34BHCSPOVN, RR28BHCSPOVN, RR32BHCSPOVN
Barcode: 5056033445580, 5056033445627, 5056033445429, 5056033445603
Product Code: HOP CRR NS OVAL-BK
Discipline: Mountain
Release Year: 2007

Hope Seat Post Carbon
$374.95
UK manufactured Carbon seat post, light enough for Road and XC use and strong enough for DH.
Part Number: HSP001CN, HSP003CN, HSP002CN
Barcode: 5056033432955, 5056033432979, 5056033432931
Product Code: HOP SPC100% designed, tested and manufactured in Barnoldswick, England. High strength carbon fibre construction with aircraft grade aluminium seat rail clamps. Smooth internal surface finish removes any unnecessary resin rich areas to minimise weight. Varying wall sections to optimise weight and areas of high stress concentrations. Same ultra-fine seat rail adjustment as tried and proven on our previous à¢ÃƒÆ’ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒâ€¦Ã‚ ¡ÃƒÆ’‚ ¬ÃƒÆ’Æ’â‚ ¬Ã‚ ¦ÃƒÆ’‚ ¡ÃƒÆ’ƒÆ’'"Ʀ ¾ÃƒÆ’ƒÆ’' ²Eternity Seatpost. Available in à¢ÃƒÆ’Æ’â‚ ¬Ã‚ ¹ÃƒÆ’ ¢Ã¢â‚¬Å¡Ã‚ ¬Ã‚ Ãâ‚ ¬Ã‚ ¦ÃƒÆ’‚ ¡ÃƒÆ’ƒÆ’' ²27.2mm x 350mm, à¢ÃƒÆ’Æ’â‚ ¬Ã‚ ¹ÃƒÆ’ ¢Ã¢â‚¬Å¡Ã‚ ¬Ã‚ Ãâ‚ ¬Ã‚ ¦ÃƒÆ’‚ ¡ÃƒÆ’ƒÆ’' ²30.9mm x 400mm and à¢ÃƒÆ’Æ’â‚ ¬Ã‚ ¹ÃƒÆ’ ¢Ã¢â‚¬Å¡Ã‚ ¬Ã‚ Ãâ‚ ¬Ã‚ ¦ÃƒÆ’‚ ¡ÃƒÆ’ƒÆ’' ²31.6mm x 400mm. Weights: 27.2 185g// 30.9 & 31.6 220g.
Discipline: Mountain
Material: Carbon
Set Back: 15mm
Release Year: 2017

BBB Cycling Fiberattack MTB Handlebar + Stem Carbon Black
$549.99
Features:
- Unique combination of stem and handlebar.
- Integrated one piece design provides maximum strength while maintaining minimum weight.
- Feather light yet durable T700 carbon fiber offers exceptional quality and unsurpassed fatigue damping performance.
- Fork tube diameter: 1.1/8
- Backsweep: 5 degree.
- Angle: 8 degree.
- Weight: 275 grams.
- Width: 580mm.
- Extensions: 100, 110 and 120mm.
Part Number: BHB-20
Barcode: 8716683021301, 8716683021318
Product Code: BBB BHB-20Release Year: 2020

Hope Tech 4 X2 FM Brake
from $449.95
Drawing from our extensive 25-year background in hydraulic brake system creation, the Tech 4 X2 represents a leap forward. Incorporating fresh internal seals to minimize friction and employing roller bearings for the pivot, we've succeeded in reducing the spring rate. This results in a smoother lever action, reducing rider fatigue while maintaining our celebrated responsiveness and modulation. Coupled with the latest X2 Postmount or Flatmount caliper, it becomes a nimble, customizable brake.
Features:
- Increased power versus Tech 3.
- Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking.
- Hinged clamp reducing weight and to improve ergonomics.
- Tool free bite point and reach adjustments.
- Hybrid piston design.
- Rigid CNC'd one piece caliper.
- Compatible with a wider range of current shifter options.
- Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange.
- Choose either standard or braided hose (braided hose is an extra cost).
- 30% pressure increase compared with the Tech 3 brake.
- Reservoir area increased to lower overall stack height.
- Shifter integration has been improved and now offers 30 ° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options.
- Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use.
- The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3.
- All Tech 4 brakes are supplied with new racing compound pads.
- Maximum Rotor thickness for X2 caliper 2.3mm.
Part number: T4X2FNR, T4X2FNL, T4X2FBR, T4X2FBL, T4X2FCR, T4X2FCL, T4X2FPUR, T4X2FPUL, T4X2FRR, T4X2FRL, T4X2FSR, T4X2FSL, T4X2FZSNR, T4X2FZSNL, T4X2FZSBR, T4X2FZSBL, T4X2FZSCR, T4X2FZSCL, T4X2FZSPUR, T4X2FZSPUL, T4X2FZSRR, T4X2FZSRL, T4X2FZSSR, T4X2FZSSR, T4X2FAL, T4X2FAR
Barcode: 5056454909852, 5056454909845, 5056454909777, 5056454909760, 5056454909814, 5056454909807, 5056454909890, 5056454909883, 5056454909937, 5056454909920, 5056454909975, 5056454909968, 5056454910094, 5056454910087, 5056454910018, 5056454910001, 5056454910056, 5056454910049, 5056454910131, 5056454910124, 5056454910179, 5056454910162, 5056454910216, 5056454910209, 5056454980172, 5056454980189
Product code: HOP BS T4X2FMFlatmount Caliper Mount options:
- Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks
- Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames
- The caliper will also fit directly on Flatmount rear standard using a Ø140 disc.
- The Flatmount X2 caliper is designed for use with the Hope Tech 4, Tech 3, XCR Pro and Tech/Tech Evo levers only.Release Year: 2023

Hope Pro 2 Evo Front Hub QR
$139.95
The now proven range of Pro2 hubs have gone from strength to strength since they were launched. Countless tests, reviews and of course rider feedback have shown that the Pro 2 is everything that Hope designed it to be. They have a couple of noticeable changes on the hubs now - first one is that they all now run stainless steel bearings throughout, bringing them inline with Pro3. This means longer life, smoother, free running and even more value for money.
With the bearing change comes a new axle. The old 15mm axle is now replaced with a 17mm version. This means total compatibility with Maxle and Maxle Lite (reg) 12mm bolt through.
This hub features a one piece 7075 aluminium rotor body and pawl carrier. Four pawls engage into a twenty-four tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non contact labyrinth seal. The axle runs on five cartridge bearings. All Pro 2 hubs are standard 6 bolt disc compatible. The hub shell is machined from a solid billet of 2014 T6 aluminium.
The following types are available and can be interchanged with additional spacers/axles which are available separately: - Front QR - Front 9mm - Front 20mm - Front 15mm.
Part Number: FHPRE28BQR, FHPRE32BQR, FHPRE36BQR, FHPRE36RQR, FHPRE32NQR, FHPRE36SQR, FHPRE36NQR, FHPRE28MQR, FHPRE28SQR, FHPRE28RQR, FHPRE32MQR, FHPRE32SQR, FHPRE28NQR, FHPRE36MQR
Barcode: 5055168035253, 5055168034959, 5055168035192, 5055168035451, 5055168035611, 5055168035338, 5055168035659, 5055168035574, 5055168035031, 5055168035154, 5055168035116, 5055168035291, 5055168035413, 5055168034997, 5055168035079, 5055168035536, 5055168034980, 5055168035499
Product Code: HOP H2FQFHPRE36BQR
Discipline: Mountain
Axle Type: Quick Release
Release Year: 2014

Hope Pro 2 Evo Front Hub 9mm Axle Gold 28 Hole
$139.95
The now proven range of Pro2 hubs have gone from strength to strength since they were launched. Countless tests, reviews and of course rider feedback have shown that the Pro 2 is everything that Hope designed it to be. They have a couple of noticeable changes on the hubs now - first one is that they all now run stainless steel bearings throughout, bringing them inline with Pro3. This means longer life, smoother, free running and even more value for money.
With the bearing change comes a new axle. The old 15mm axle is now replaced with a 17mm version. This means total compatibility with Maxle and Maxle Lite (reg) 12mm bolt through.
This hub features a one piece 7075 aluminium rotor body and pawl carrier. Four pawls engage into a twenty-four tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non contact labyrinth seal. The axle runs on five cartridge bearings. All Pro 2 hubs are standard 6 bolt disc compatible. The hub shell is machined from a solid billet of 2014 T6 aluminium.
The following types are available and can be interchanged with additional spacers/axles which are available separately: - Front QR - Front 9mm - Front 20mm - Front 15mm.
Part Number: FHPRE28BQR, FHPRE32BQR, FHPRE36BQR, FHPRE36RQR, FHPRE32NQR, FHPRE36SQR, FHPRE36NQR, FHPRE28MQR, FHPRE28SQR, FHPRE28RQR, FHPRE32MQR, FHPRE32SQR, FHPRE28NQR, FHPRE36MQR
Barcode: 5055168035253, 5055168034959, 5055168035192, 5055168035451, 5055168035611, 5055168035338, 5055168035659, 5055168035574, 5055168035031, 5055168035154, 5055168035116, 5055168035291, 5055168035413, 5055168034997, 5055168035079, 5055168035536, 5055168034980, 5055168035499
Product Code: HOP H2FQFHPRE36BQR
Discipline: Mountain
Axle Type: Quick Release
Release Year: 2014

BBB Cycling FIBREFORCE 10D 31.8
$119.99
Carbon fibre body and CNC-machined alloy bar and steerer clamp.
1.1/8" - 31.8mm -
Stainless steel bolts.
Size: 90mm / 100mm / 110mm / 120mm / 130mm - BHS-14-RS-110
Part Number:
Barcode: 8716683030754, 8716683030778, 8716683019766, 8716683019742, 8716683030792, 8716683019728, 8716683019759, 8716683030785, 8716683019735, 8716683030761
Product Code: BHS-14-GS-90
Discipline: Road
Clamp Size: 31.8mm
Steerer Diameter: 1 1/8"
Material: Carbon
Release Year: 2007

BBB Cycling Vanguard Saddle Cromo 155mm
$79.99
Road and MTB designed with ComfortLite geometry.
Features:
- Road/MTB saddle for sportive/competitive cycling posture.
- Pressure relieving cut-out which keeps the blood flow intact and eliminates pressure points under the pubic arch.
- Also available: 155 x 270 mm (BSD-76).
- Glassfiber reinforced shell.
- Light foam with hard density for good support on long rides.
- Durable synthetic cover.
Part Number: BSD-75
Barcode: 8716683095715, 8716683095722
Product Code: BBB BSD-75'- Waterproof
- Anatomic hole
- Density Super hard
- Rail: CrMo.
- Sitbone width (mm): 110 - 135.
- Weight (gr): 240.
- Length x width (mm): 270 x 145.
Discipline: Road
Release Year: 2020

BBB Cycling SpeedWire Workshop 50x Gear Cable Teflon Shimano 2000mm
$349.99
The SpeedWire BCB-31 stands out as a remarkably robust shifting cable designed for Shimano and SRAM shifting systems. Crafted from stainless steel, it boasts a smooth surface to reduce friction. Measuring 1.1mm in diameter and extending 2000mm in length, it's built to last.
Feature:
- 100pcs.
Part Number: 2909053101, 2909053102
Barcode: 8716683062274, 8716683094107, 8716683013269, 8716683013276
Product Code: BBB BCB-31'- Compatible with: Shimano/SRAM.Release Year: 2020