ENDURO HT MR 1526 INNER
$6.95
HT MR 1526 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for MR 1526 size bearings (15mm X 26mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT MR 1526 Inner
ENDURO BRT-100
$279.95
BRT-100 - Blind Hole Bearing Puller Set (Black-Oxide)This tool set allows you to pull bearings that are pressed into a housing, as found in all hubs and pivots. Includes a full selection of expandable pullers to work on bearings with an inside diameter between 8-32mm. Featuring Black Oxide coated pullers and plated slide hammer. Bearings not included.
ENDURO SWG-3848
$62.95
SWG-3848 - 38mm and 48mm Add-on kit for ST-010 Pro Fork Seal KitThis kit expands the capability of the ST-010 to work with 38mm stantions and 48mm sliders.Enduro Item Code: SWG-3848
ENDURO ST-010
$569.95
ST-010 - Pro Fork Seal Tool KitThis tool set is designed to safely install oil seals and wipers into suspension forks. The ST-010 includes the most popular sized guides to safely install seals for 32mm, 34mm, 35mm, 36mm, and 40mm fork stantions. The guides install quickly onto the universal handle and the wiper/seal guide is reversible for both oil seal and wiper installation.Enduro Item Code: ST-010
ENDURO PULLER
$119.95
Puller 15-16 CR-MO - Phosphate-Treated CR-MO steel, Bearing Puller for bearings with 15-16mm IDsProfessional quality, heat-treated, phosphate-treated CR-MO steel, replacement puller for use with the BBT-222, BBT-200 and BBT-100 Blind-Hole Puller Sets. This is the updated stock puller that comes with the BBT-222 took kit.
ENDURO PULLER
from $31.95
Puller 12-14mm - Black Oxide, Expanding Collet, Bearing Puller for bearings with 12-14mm IDsReplacement Puller for use with the BBT-100 Bland-Hole or BBT-222 Puller Sets.Enduro Item Code: TK puller 12-14mm
ENDURO PT-030
$41.95
PT-030 - Replacement Expanding Split-Collet for BRT-002 ToolReplacement for lost or damaged part from the BRT-002 bottom bracket bearing tool.Enduro Item Code: PT-030
ENDURO PT-011
$99.95
PT-011 - Zip-Nut for 5/16' (8mm) ACME threadQuick-release nut for use with BRT-060 and BRT-050 bearing presses.Designed to quickly slide onto a 3/8' (8mm) ACME bearing press rod to be compressed into the bayonet handles of BRT-060 and BRT-050 bearing press kits.The unique design provides 360 degree thread contact to ensure secure and precise bearing press alignment, for quick, professional results.Please note that this item is the split nut only. The bearing press in the photos is only shown to illustrate the part in use.
ENDURO PT-009
$41.95
PT-009 - Replacement Expanding Split-Collet for BRT-003 ToolReplacement for lost or damaged part from the BRT-003 bottom bracket bearing tool.Enduro Item Code: PT-009
ENDURO NBT-003
$42.95
NBT-003 - Rear Shock Needle Bearing Guide SetThis guide set allows you to remove and replace needle bearings in shock mounts when used with one of our bearing presses (BRT-045 or BRT-050).Enduro Item Code: NBT-030
ENDURO HT R6 OUTER
$10.95
HT R6 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050) Enduro Item Code: TK HT R 6 Outer
ENDURO HT R6 INNER
$6.95
HT R6 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050) Enduro Item Code: TK HT R 6 Inner
ENDURO HT MR 18307 INNER
$8.95
HT MR 18307 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for MR 18307 size bearings (18mm X 30mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT MR 18307 Inner
ENDURO HT MR 1728 OUTER
$11.95
HT MR 1728 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for MR 1728 size bearings (17mm X 28mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT MR 1728 Outer
ENDURO HT MR 1728 INNER
$6.95
HT MR 1728 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for MR 1728 size bearings (17mm X 28mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT MR 1728 Inner
ENDURO HT 6903 OUTER
$11.95
HT 6903 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6903 size bearings (17mm X 30mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6903 Outer
ENDURO HT 6902 OUTER
$11.95
HT 6902 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6902 size bearings (15mm X 28mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6902 Outer
ENDURO HT 6902 INNER
$6.95
HT 6902 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6902 size bearings (15mm X 28mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6902 Inner
ENDURO HT 6900 OUTER
$14.95
HT 6900 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6900 size bearings (10mm X 22mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6900 Outer
ENDURO HT 6900 INNER
$6.95
HT 6900 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6900 size bearings (10mm X 22mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6900 Inner
ENDURO HT 6806/29 INNER
$11.95
HT 6806/29 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for SRAM DUB 6806/29 size bearings (29mm X 42mm).Enduro Item Code: TK HT 6806/29 Inner
ENDURO HT 6806 INNER
$9.95
HT 6806 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6806 size bearings (30mm X 42mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6806 Inner
ENDURO HT 6805 OUTER
$14.95
HT 6805 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6805 size bearings (25mm X 37mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6805 Outer
ENDURO HT 6804 INNER
$6.95
HT 6804 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6804 size bearings (20mm X 32mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6804 Inner
ENDURO HT 6802 OUTER
$14.95
HT 6802 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6802 size bearings (15mm X 24mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6802 Outer
ENDURO HT 6802 INNER
$6.95
HT 6802 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6802 size bearings (15mm X 24mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6802 Inner
ENDURO HT 6801 OUTER
$10.95
HT 6801 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6801 size bearings (12mm X 21mm). Please note this item is a single guide only, the image is to shows both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6801 Outer
ENDURO HT 6801 INNER
$6.95
HT 6801 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6801 size bearings (12mm X 21mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6801 Inner
ENDURO HT 6800 INNER
$6.95
HT 6800 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)
Single guide for 6800 size bearings (10mm X 19mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6800 Inner
ENDURO HT 6704 OUTER
$8.95
HT 6704 Outer - Outer Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6704 size bearings (20mm X 27mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6704 Outer
ENDURO HT 608 INNER
$6.95
HT 608 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 608 size bearings (8mm X 22mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 608 Inner
ENDURO HT 6000 INNER
$6.95
HT 6000 Inner - Inner Bearing Guide for Bearing Press (BRT-005 or BRT-050)Single guide for 6000 size bearings (12mm X 26mm). Please note this item is a single guide only, the image is to show both sides of the guide, not a pair of guides. If you need a pair please order two.Enduro Item Code: TK HT 6000 Inner
ENDURO GS 1.5X71 SUS304
$4.95
GS 1.5x71 SUS304 -Replacement Garter Spring for BRT-002 Split-ColletSometimes this little delicate parts can get bent or broken, this is the exact replacement for the spring that keeps the two halves of split-collet together.Enduro Item Code: GS 1.5x71 SUS304
ENDURO GS 1.5X58 SUS304
$5.95
GS 1.5x58 SUS304 -Replacement Garter Spring for BRT-003 Split-ColletSometimes this little delicate parts can get bent or broken, this is the exact replacement for the spring that keeps the two halves of split-collet together.Enduro Item Code: GS 1.5x58 SUS304
ENDURO CT-012
$38.95
CT-012 - Stainless Bearing Dummy Pedal ToolThis tool is for making adjustments on a bicycle when pedals are not in place or present. The Enduro Pedal Dummy Tool anodized aluminum shaft threads into crank arm and rotates smoothly on one larger, stainless 6302 bearing.Please note this is for drive-side ISO right-hand thread crank arms only.
ENDURO BRT-222
$789.95
BRT-222 - Stainless Pro Blind Hole Puller/Mallet SetA major upgrade to our standard blind hole puller, this set is designed and manufactured with professional mechanics in mind. This tool set includes high-quality, heat-treated CrMo collets designed to remove bearings with an inside diameter between 8-32mm. The stainless steel slide hammer shaft doubles as a handle for a stainless mallet head and comes with two screw-in replaceable heads (brass and poly-urethane). The back side of the mallet is also machined to magnetically hold a cassette lock-ring tool, allowing the mallet to serve double duty as a lock-ring tool.
ENDURO BRT-105
$7.95
BRT-105 - Enduro Basic Bearing Puller 8-25 mmThis simple little expanding tool allows you to grab smaller sized bearings from the backside and work it out with the help of a screwdriver or similar type of lever.
ENDURO BRT-060-S
$94.95
BRT-060-S - Replacement short (suspension) rod and nut for BRT-060.65mm, stainless steel, 5/16' ACME threaded rod with standard nut and static nut fitted with a precision needle bearing set with ground surfaces to provide smooth and accurate, bind-free action. This rod and nut can be also combined with the BRT-051 suspension guide kit to complete a stand alone suspension service kit.
ENDURO BRT-060-H
$139.95
BRT-060-H - Bayonet handle set for BRT-060These interchangeable 6061 alloy handles snap on to the 15 mm (or 5/8) stainless nuts (compatible with BRT-060 and BRT-050), which can also be worked with open end, socket wrenches, or an 8mm Allen. The interchangeable handles are removable to make room in tight spaces, or can be mixed to provide more or less leverage (they spin best when the lengths are the same). These bayonet handles are designed to fit BRT-060-S and BRT-060-M threaded rods and nut sets, as well as the PT-011 Zipnut.