Mountain bike's first tuned carbon wheel system for enduro riding and racing. Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear-specific inner rim widths are optimized for wider tires in the front and narrower tires in the rear. Compliant Front Wheel: Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. Lower Spoke count Lighter Weight Spoke Wider Inner Width Lighter Rim Stiff Rear Wheel: Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tyre profile in the rear, improves rolling resistance, and sharpens tire edge for grip. Higher Spoke Count Heavier Spoke Weight Narrower Inner Rim Width Tougher Rim Specifications: Engagement (I9) 0.52º Quick Engagement/ Six Pawls Engagement (P321) 2.5º quiet engagement / magnetic pawls (x6) ETRTO (27.5) 585mm ETRTO (29) 622mm Front hub dimensions Boost: 20mm, Standard: ISO 20mm Hub (I9) Synthesis 11 (Industry Nine Hydra Hub) Hub (P321) Synthesis 11 (Project 321 internals) Inner rim width front 31.5mm Inner rim width rear 31.5mm Outer rim width front 38.7mm Outer rim width rear 39.5mm Rear hub dimensions 12x157mm (installed), 12x150mm (axle end cap kit available) Rim height 18.75mm Spoke count front 28 Spoke count rear 32 Spokes front Sapim CX-Ray Spokes rear Sapim CX-Sprint Warranty lifetime (rim only) Weight per set (27.5) 1945g Weight per set (29) 1995g

Mountain bike's first tuned carbon wheel system for enduro riding and racing. Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear-specific inner rim widths are optimized for wider tires in the front and narrower tires in the rear. Compliant Front Wheel: Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. Lower Spoke count Lighter Weight Spoke Wider Inner Width Lighter Rim Stiff Rear Wheel: Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tyre profile in the rear, improves rolling resistance, and sharpens tire edge for grip. Higher Spoke Count Heavier Spoke Weight Narrower Inner Rim Width Tougher Rim SPECIFICATIONS: Engagement: (I9) 0.52º Quick Engagement/ Six Pawls Engagement: (P321) 2.5º quiet engagement / magnetic pawls (x6) ETRTO (27.5): 585mm ETRTO (29): 622mm Hub: (I9) Synthesis 11 (Industry Nine Hydra Hub) Hub: (P321) Synthesis 11 (Project 321 internals) Inner rim width front: 31.5mm Inner rim width rear: 29.5mm Outer rim width front: 37.5mm Outer rim width rear: 36.5mm Rim height: 18mm Spoke count front: 28 Spoke count rear: 32 Spokes front Sapim: CX-Ray Spokes rear Sapim: CX-Sprint Warranty lifetime (rim only) Weight per set (27.5): 1760g Weight per set (29): 1825g

Minimal & lightweight 4-sided entry / superior mud shedding Customizable float and release angle Traction pad compatible (sold separately) Premium bearings Double seal system 5 year warranty Owners Manual and Technical Documents here GRAVEL TRAIL XC SPECS BODY MATERIAL Cast stainless steel FOOTPRINT 32mm x 75mm WING MATERIAL Stamped steel SPINDLE LENGTH 52mm INNER BEARING TYPE Igus LL-glide bearing OUTER BEARING TYPE Enduro cartridge bearing ENDCAP Slotted SPINDLE MATERIAL Forged SCM 435 Chromoly Steel SPRING MATERIAL 300 series stainless steel MAX RIDER WEIGHT No restriction WEIGHT 285g per pair INCLUDED CLEAT TYPE 15° / 20° Standard Release, 6° Float WARRANTY 5 years

Minimal & lightweight 4-sided entry / superior mud shedding Customizable float and release angle Hex alloy endcap Premium bearings Double seal system Traction pad compatible (1mm set included) 5 year warranty Owners Manual and Technical Documents here GRAVEL TRAIL XC SPECS BODY MATERIAL Cast stainless steel FOOTPRINT 32mm x 75mm WING MATERIAL 17-4PH Stainless SPINDLE LENGTH 52mm INNER BEARING TYPE Igus LL-glide bearing OUTER BEARING TYPE Enduro MAX cartridge bearing ENDCAP Hex alloy SPINDLE MATERIAL Forged SCM 435 Chromoly Steel SPRING MATERIAL 300 series stainless steel MAX RIDER WEIGHT No restriction WEIGHT 280g per pair INCLUDED CLEAT TYPE 15° / 20° Standard Release, 6° Float WARRANTY 5 years

Mike “Hucker” Clark brings his So Cal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance,.The 160mm grip’s Californa-inspired Beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most.PRODUCT FEATURES:Features a unique two material design that allows for improved bar adhesion and less grip slippageSoft vertical ribs provide excellent paddingHorizontal ribs on front of the grip o?ffer improved traction.Available in 4 Color Ways with coordinated end plugsExtra Long 160mm LengthSold In Pairs

Mike “Hucker” Clark brings his So Cal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance,.The 160mm grip’s Californa-inspired Beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most.PRODUCT FEATURES:Features a unique two material design that allows for improved bar adhesion and less grip slippageSoft vertical ribs provide excellent paddingHorizontal ribs on front of the grip o?ffer improved traction.Available in 4 Color Ways with coordinated end plugsExtra Long 160mm LengthSold In Pairs

Mallet E LS The ultimate pedal for enduro riding and racing, now with a longer spindle Concave platform for secure foothold 6 adjustable pins per side for grip Traction pad technology customizable interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes 57mm q-factor for increased shoe clearance and control 4-sided entry / superior mud shedding Customizable float & release angle Premium bearings & double seal system

Mallet DH Race II It’s no coincidence that the beefed up version of the Mallet Enduro pedal is used by the best riders on the DH World Cup circuit. The Mallet DH pedal has been designed to offer excellent support whatever the conditions and even when the shoe is not clipped in, thanks to the concave platform and the 8 adjustable pins on each side. Features Concave platform for secure foothold 8 adjustable pins per side for grip Traction pad technology customizable interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes 57mm q-factor for stability at speed 4-sided entry / superior mud shedding Customizable float & release angle Premium bearings & double seal system SPECIFICATIONS Spindle material: forged scm 435 chromoly steel Body material: 6061-T6 aluminium Wing material: cast stainless steel Spring material: 300 series stainless steel Release angle: 15° / 20° Max rider weight: no restriction Q-factor: 57mm Inner bearing type: igus LL-glide bearing Outer bearing type: enduro cartridge bearing Cleat: premium brass cleats with shims included Adjustable pins: 8 per side for grip Endcap: hex alloy Weight: 479g Warranty: 5 years

Mallet DH Race II It’s no coincidence that the beefed up version of the Mallet Enduro pedal is used by the best riders on the DH World Cup circuit. The Mallet DH pedal has been designed to offer excellent support whatever the conditions and even when the shoe is not clipped in, thanks to the concave platform and the 8 adjustable pins on each side. Features Concave platform for secure foothold 8 adjustable pins per side for grip Traction pad technology customizable interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes 57mm q-factor for stability at speed 4-sided entry / superior mud shedding Customizable float & release angle Premium bearings & double seal system SPECIFICATIONS Spindle material: forged scm 435 chromoly steel Body material: 6061-T6 aluminium Wing material: cast stainless steel Spring material: 300 series stainless steel Release angle: 15° / 20° Max rider weight: no restriction Q-factor: 57mm Inner bearing type: igus LL-glide bearing Outer bearing type: enduro cartridge bearing Cleat: premium brass cleats with shims included Adjustable pins: 8 per side for grip Endcap: hex alloy Weight: 479g Warranty: 5 years

Mallet DH Race II It’s no coincidence that the beefed up version of the Mallet Enduro pedal is used by the best riders on the DH World Cup circuit. The Mallet DH pedal has been designed to offer excellent support whatever the conditions and even when the shoe is not clipped in, thanks to the concave platform and the 8 adjustable pins on each side. Features Concave platform for secure foothold 8 adjustable pins per side for grip Traction pad technology customizable interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes 57mm q-factor for stability at speed 4-sided entry / superior mud shedding Customizable float & release angle Premium bearings & double seal system SPECIFICATIONS Spindle material: forged scm 435 chromoly steel Body material: 6061-T6 aluminium Wing material: cast stainless steel Spring material: 300 series stainless steel Release angle: 15° / 20° Max rider weight: no restriction Q-factor: 57mm Inner bearing type: igus LL-glide bearing Outer bearing type: enduro cartridge bearing Cleat: premium brass cleats with shims included Adjustable pins: 8 per side for grip Endcap: hex alloy Weight: 479g Warranty: 5 years